Adjusting Warning Angles; Enabling Or Disabling Warning Angle Alerts; Viewing The Altimeter, Barometer, And Compass; Calibrating The Compass - Garmin TREAD Owner's Manual

Adjusting Warning Angles

You can adjust the angles at which the device activates a pitch or roll alert. You are responsible for knowing and
setting the correct pitch and roll angle for your vehicle.
1 From the main menu, swipe to the left and select Pitch and Roll > > Warning Angles.
2 Swipe up or down to adjust the pitch or roll warning angles.
3 Select Accept.

Enabling or Disabling Warning Angle Alerts

1 From the main menu, swipe to the left and select Pitch and Roll > .
2 Select an option:
• To enable or disable pitch and roll notifications, select Pitch and Roll Notifications.
• To enable or disable audible alerts, select Audible Alerts.

Viewing the Altimeter, Barometer, and Compass

The device contains internal altimeter, barometer, and compass sensors with automatic calibration.
Select > Adventure > ABC.
TIP: You can also select the Altimeter or Barometer widget to open the ABC app.

Calibrating the Compass

Calibrate the electronic compass outdoors. To improve heading accuracy, do not stand near metal objects or
objects that influence magnetic fields, such as vehicles, electronic devices, buildings, or overhead power lines.
When your device is connected to the mount, it uses GPS data to determine your compass heading. When you
remove the device from the mount, it uses a built-in compass to show your heading.
Each time you disconnect your device from the mount, the device prompts you to calibrate the compass.
If you experience irregular compass behavior, for example, after moving long distances or after extreme
temperature changes, you can manually calibrate the compass to improve accuracy.
1 Disconnect the device from the mount and move away from objects that influence magnetic fields.
2 From the main menu, swipe to the left and select Altimeter > > Calibrate Compass.
3 Follow the on-screen instructions.

Group Ride

The Group Ride app allows you to coordinate rides and communicate with nearby riders using preset text
messages, live map locations, and voice communications.
NOTE: Before you can use the Group Ride app, you must install a Group Ride accessory. Go to
purchase a Group Ride accessory.

Starting a Group Ride

You can create a group ride that allows you to choose the group radio channel, view and remove riders who join
your group ride, and set the group ride name.
NOTE: For some product models, the Group Ride app is located in the apps menu.
1 From the main menu, select Group Ride > Start a Group Ride.
2 Enter your rider name, and select Done.
3 If necessary, select the radio channel, and select Next.
4 Enter the ride name, and select Done.
As riders join your group ride, their names appear on the list.
5 Select Start.
The group ride begins after all riders sync with the group ride.
12
NOTICE
garmin.com to
Off-Road Navigation Features