Arriving At Your Destination; Changing The Route Calculation Mode; Taking A Route Using Garmin Adventurous Routing; Taking A Detour - Garmin TREAD Owner's Manual

Arriving at Your Destination

When you approach your destination, the device provides information to help you complete your route.
• indicates the location of your destination on the map, and a voice prompt announces you are approaching
your destination.
• When you approach some destinations, the device automatically suggests parking areas. You can select
More to view a full list of suggested parking areas
• When you stop at your destination, the device automatically ends the route. If the device does not detect your
arrival automatically, you can select

Changing the Route Calculation Mode

1 Select > Navigation > Calculation Mode.
2 Select an option:
• Select Faster Time to calculate routes on streets that are faster to drive but can be longer in distance.
• Select Off Road to calculate off-road, point-to-point routes in a straight line.
• Select Shorter Distance to calculate routes on streets that are shorter in distance but can take more time
to drive.

Taking a Route Using Garmin Adventurous Routing

Your device can calculate adventurous routes that prefer curvy roads, hills, and fewer highways. This feature
can provide a more enjoyable ride, but it may increase the time or distance to your destination. The Garmin
Adventurous Routing feature is not compatible with off-road trails.
NOTE: This feature is not available on all device models or for all map regions.
1 Select Where To > Categories.
2 If necessary, select a subcategory.
3 Select a location.
4 Select .
5 Use the slider to increase or decrease the level of adventure of your route.
6 Select Go!

Taking a Detour

You can take a detour for a specified distance along your route or detour around specific roads. This is useful if
you encounter construction zones, closed roads, or poor road conditions.
1 From the map, select
2 Select an option:
• To detour your route for a specific distance, select Detour by Distance.
• To detour around a specific road on the route, select Detour by Road.

Going Home

The first time you start a route home, the device prompts you to enter your home location.
1 Select Where To > Go Home.
2 If necessary, enter your home location.

Editing Your Home Location

1 Select Where To >
2 Enter your home location.
Street Navigation
> Stop to end your route.
> Edit Route.
> Set Home Location.
(Parking Near Your Destination, page
™
44).
43