Enabling Or Disabling Driver Alerts; Settings; Navigation Settings; Map And Vehicle Settings - Garmin TREAD Owner's Manual

State and country borders: The device plays a tone and displays a message when you approach the border of a
state or country.
Shut off propane: The device plays a tone and displays a message when you approach an area where propane
should be turned off.

Enabling or Disabling Driver Alerts

You can enable or disable several types of driver alerts.
1 Select > Driver Assistance > Driver Alerts.
2 Select or clear the check box next to each alert.

Navigation Settings

Select > Navigation.
Calculation Mode: Sets the route calculation method.
Off-Route Recalculation: Sets recalculation preferences when navigating away from an active route.
Avoidances: Sets road features to avoid on a route.
Custom Avoidances: Allows you to avoid specific roads or areas.
Environmental Zones: Sets the avoidance preferences for areas with environmental or emissions restrictions
that may apply to your vehicle.
Restricted Mode: Disables all functions that require significant operator attention.
Voice Language: Sets the language for navigation voice prompts.
Travel History: Allows the device to store a record of the places you go. This allows you to view the trip log, use
the Trip History feature, and use myTrends
Clear Travel History: Allows you to clear all travel history from the device.

Map and Vehicle Settings

Select > Map Display.
Map Vehicle Icon: Sets the vehicle icon that represents your position on the map.
Driving Map View: Sets the perspective on the map.
Map Detail: Sets the level of detail on the map. More detail may cause the map to draw slower.
Map Theme: Changes the color of the map data.
Map Layers: Sets the data that appears on the map page
Adventure Roads & Trails: Sets the trails visible on the map. Trails are organized by vehicle accessibility.
Auto Zoom: Automatically selects the zoom level for optimal use of your map. When disabled, you must zoom
in or out manually.
Skip Next Stop Confirmation: Sets a confirmation message to appear when skipping a location on your route.
Units: Sets the units of measure.
myMaps: Sets which installed maps the device uses.

Enabling Maps

You can enable map products installed on your device.
TIP: To purchase additional map products, go to garmin.com/maps.
1 Select > Map Display > myMaps.
2 Select a map.

Settings

Settings
suggested routes.
™
(Customizing the Map Layers, page 22).
53