Panasonic AW-E860N Operating Instructions Manual page 85

< I/F Remote connector (I/F REMOTE)
Input terminal dedicated to control signals from the
optional remote operation panel (AW-CB400, etc.) and
the RCU (AW-RC600, etc.) and the camera pan/tilt unit
(AW-PH360/AW-PH400/AW-PH405/AW-PH650, etc.).
• AW-RC600 is connected through the optional RCU
cable (AW-CA50A26).
• AW-CB400 is connected through the optional
connecting cable (AW-CA50T8).
= Power indicator
Red LED lamp lights to indicate that the specified DC
power is supplied to the camera.
> DC 12 V input connector (DC 12V IN)
12 V DC is supplied through the DC cable with ø6.5 plug.
(Supplied with recommended AC adapter: AW-PS505A)
Cautions
1. Connect this to a DC 12 V class 2 power supply
only.
2. To prevent fire or shock, the UL listed wire
VW-1, style 1007 should be used as for the cable
for DC 12 V input connector.
? Cable clamp
Clamp the DC cable with ø6.5 plug connected to the DC
12 V input connector to prevent it from slipping out.
@ G/L input connector (G/L IN)
Signals synchronized with the reference signal are to be
supplied to this connector when the camera is to be
synchronized with the reference signal BB.
A Optional card slot
Slot for inserting an optional card. For details, refer to the
manual for optional cards.
-13-