Panasonic AW-E860N Operating Instructions Manual page 107

If the output signal from
camera is color bar, only "G/L,
Color Bar Set" screen is
displayed.
$ Setting
[Setting by CAMERA, RCU or multi hybrid control panel]
1. From the camera alone:
Keep the MENU switch depressed for 5 seconds or more.
From RCU:
Set the menu ON/OFF switch to the ON position.
From multi hybrid control panel:
Keep the MENU/A button depressed for 2 seconds or
more.
The main menu appears on the monitor screen.
2. Each time the MENU switch (A), ITEM/AWC switch (S),
or NO/BAR switch (–) is pressed, the blinking item moves
up or down.
3. When the YES/ABC switch is pressed after selecting the
desired item to blink, the submenu for the selected item
appears on the screen.
4. Select the desired item to be changed in its settings using
the MENU switch (A) and ITEM/AWC switch (S).
5. Press the YES/ABC switch (+) or NO/BAR switch (–) to
change the settings.
6. Select [Return] using the MENU switch and ITEM/AWC
switch, then press the YES/ABC switch to return to the
main menu.
7. After changing the settings, take the following steps.
Camera alone:
Select [End] using the MENU switch and ITEM/AWC
switch and press the YES/ABC switch.
RCU:
Set the menu ON/OFF switch to the OFF position.
The camera will now operate according to the new
settings.
CAMERA
MENU
ITEM/AWC
YES/ABC
NO/BAR
[SETTING with ROP]
Menu settings cannot be established using the ROP. The
functions are set on the LCD panel of the ROP.
For further details, refer to the Operating Instructions of the
ROP.
$ Changing the Language setting
The language on the menu screen can be changed from
English to Japanese. (Factory setting: English)
• Halogen, Fluorescent, Outdoor Mode
Select "Japanese" in the "Language" setting in Other Set
submenu.
• Use Mode
Select "Japanese" in the "Language" setting in Other Set2
submenu.
-35-
Menu ON/OFF switch
Remote control unit