Panasonic AW-E860N Operating Instructions Manual page 120

V Gain Setting
[Gain: Auto, 0 dB to 30 dB, N/Eye L, N/Eye H]
Auto: The light quantity is adjusted
automatically.
0 dB: 0 dB should be selected in normal cases.
1 dB to 30 dB: Use this range if sufficient video output
cannot be obtained even when the lens
iris is opened in shooting dark scenes.
N/Eye L (Night Eye L):
Use this mode if sufficient video output
cannot be obtained even if 30 dB gain up
should be selected.
N/Eye H (Night Eye H):
Use this setting if it is not possible to
achieve a satisfactory video output even
at the Night Eye L setting.
Notes
• Only 0 dB, 9 dB, or 18 dB, AGC LOW, AGC HIGH can
be selected in case of using the RCU.
If the lens iris switch is at MANUAL, when operating the
camera alone or when the lens iris selector switch (IRIS
button) on the RCU, ROP or multi hybrid control panel
is at AUTO, AGC may not function.
• In the case of the multi hybrid control panel, the gain
operates at the AGC HIGH setting when AGC is
selected.
• 0 dB when the GAIN button on the multi hybrid control
panel is at 0 dB, 9 dB when it is at LOW, or 18 dB when
it is at HIGH.
GAIN button
In the case of the multi hybrid control panel, the gain
setting is selected in the following sequence every time
the GAIN button is pressed: 0 dB i LOW (9 dB) i HIGH
(18 dB) i AGC (AGC HIGH).
In the case of the ROP, the gain is set using the five
buttons of O, L, M, H and AGC.
The amount by which the gain is increased ("gain up")
can be set on the LCD screen of the ROP for L, M, H
and AGC.
-48-
Multi hybrid control panel