Panasonic AW-E860N Operating Instructions Manual page 118

$ Setting and changing of the setting
items (User Mode)
6 Iris, Shutter, Gain Set Display
P Video Level Adjustment [Picture Level: –50 to +50]
Convergence level of AUTO IRIS, AUTO GAINUP and
ELC can be adjusted.
Q Detecting Ratio Adjustment
[Light PEAK/AVG: P50 to A50]
The ratio of AUTO IRIS, AUTO GAINUP and ELC
detected peak to average can be adjusted within a range.
R Photometric Measurement Method Setting
[Light Area: All, Center, Top cut, BTM cut, R/L cut]
A photometric measurement method can be selected for
AUTO IRIS, AUTO GAINUP and ELC.
All: All the screen area is measured.
Center: The screen is measured mainly in the center
area, about one-third of both the top and
bottom and one-third of both the right and left
portions of the screen are excluded from
measurement.
Top cut: About one-third of the top portion of the screen
is excluded from measurement.
BTM cut: About one-third of the bottom portion of the
screen is excluded from measurement.
R/L cut: About one-third of both the right and left
portions of the screen are excluded from
measurement.
S Auto Iris Level Fine Adjustment
[Auto Iris Adjust: OFF, ON]
OFF: The lens iris control (IRIS dial, IRIS LEVEL control)
is invalid when the lens iris selector switch (IRIS
button) on the RCU, ROP or on the multi hybrid
control panel is in the AUTO position.
ON: Fine adjustment of auto iris convergence level can
be made with the lens iris control (IRIS dial, IRIS
LEVEL control) when the lens iris selector switch
(IRIS button) on the RCU, ROP or on the multi
hybrid control panel is in the AUTO position.
Lens iris selector Lens iris
switch control
Remote control unit
IRIS button
IRIS dial
Remote operation panel
-46-
IRIS LEVEL control
IRIS button
Multi hybrid control panel