Section 9: Aux Pages (Flight Planning And Unit Settings) - Garmin GNS 530 Pilot's Manual & Reference

AUX Page Group
Section 2 introduced the GNS 530' s main page groups — NAV, WPT, AUX, NRST — and described each
page in the NAV group. The third page group (AUX) allows you to change unit settings, cus tomizing opera-
tion to your preferences. The AUX pages also provide E6B functions — such as trip planning, fuel planning,
density altitude, true airspeed and winds aloft calculations.
NAV
4 available pages 10 available pages
(see list on pg. 27) (see list on pg. 88)
Flight Planning
To quickly select an AUX page:
1. From any page, press and hold CLR to select the Default NAV Page. (You may skip this step if you are already
viewing any of the main pages. See page 28.)
2. Rotate the large right knob to select the AUX page group. "AUX" appears in the lower right corner of the
screen.
3. Rotate the small right knob to select the desired AUX page.
Section 9: AUX Pages
WPT AUX
3 available pages
(see below)
Utility
NRST
8 available pages
(see list on pg. 113)
Setup
9 - aux pages
AUX Page Group
To display one of the AUX pages, start from any
main page — or press and hold CLR to display the
Default NAV Page...
...then, rotate the large right knob to select the
AUX page group, as indicated by "AUX" at the
bottom of the screen. Rotate the small right knob
to select the desired page within the group.
129 129