PARTS INCLUDED FOR ASSEMBLY (parts are not to scale):
3ea Socket Sleeves (#6)
ASSEMBLY INSTRUCTIONS:
1. Carefully unpack the fixture. Lay out all parts on a clean surface.
2. Before continuing Assembly, please proceed to the Installation Instructions.
3. Lift the Top Cover (#3). Place the three Socket Sleeves (#6) over the three
Sockets (#4).
4. Install three 60 watt candelabra incandescent light Bulbs (#5) (not included)
or three equivalent candelabra compact fluorescent light bulbs (not included)
in the three Sockets (#4) in the fixture.
5. Close the Top Cover (#3) onto the fixture frame.
Page 4