Bison BA803 Instruction Manual

—— Instruction Manual ——
Elementary Basketball Standard
Item Qty Description
A 1 BASE
B 1 H-FRAME
C 1 REAR SUPPORT
D 2 ADJUSTABLE POLE
E 1 BACKBOARD (BA600)
F 1 RIM (BA26)
G 2 WHEEL
H 4 5/16" X 3 1/2" CARRIAGE BOLT
I 4 5/16" FLAT WASHER
J 4 5/16" LOCK WASHER
 Inspect all contents prior to installation. Report any missing parts to dealer immediately
 Read all instructions before proceeding.
1. Attach Wheels (G) to Base (A) with 3/8" X 3" Hex Bolts (L), 3/8" Flat Washers (M), 3/8" Lock
Washers (N) and 3/8" Hex Nuts (P). See Figure 1.
2. Position the H-Frame (B) and Rear Support (C) in the gussets on Base (A). Install Rear Support (C) into
the short tube on H-Frame (B) with 3/8" X 2 1/2" Hex Bolt (R), 3/8" Flat Washer (M), 3/8" Lock
Washer (N) and 3/8" Hex Nut (P). Attach H-Frame (B) and Rear Support (C) with 3/8" X 2 1/2" Hex
Bolts (R), 3/8" Flat Washers (M), 3/8" Lock Washers (N) and 3/8" Hex Nuts (P). See Figure 1.
3. IMPORTANT! Please install a 3/8" X 2 1/2 Hex Bolt (R) and 3/8" Hex Nut (P) in the 2 places shown
in figure #1. These bolts are intended to provide a positive stop for the backboard assembly. See Figure 1.
4. Insert Adjustable Poles (D) into the H-Frame (B). Orient the Adjustable Poles (D) so the "top" 2 holes
spaced 15 1/2" apart are up to mount Backboard (E) using the 5/16" X 3 1/2" Carriage Bolts (H), 5/16"
Flat Washers (I), 5/16" Lock Washers (J) and 5/16" Hex Nuts (K). The square shoulders of the 5/16" X 3
1/2" Carriage Bolts (H) must be seated in the square holes in Backboard (E) before tightening the
hardware. See Figure 1 and 2.
5. Mount Rim (F) and Backboard Support Plate (O) to the backboard assembly as shown using the hardware
included with Rim (F). See Figure 1.
6. Install the net.
7. Install Padding (S) to the front uprights of the H-frame (B) toward the playing area. See Figure 1.
Date: 10/08/15 Rev: 4
BA803
B.A. N.J.C.
P A R T S L I S T
Item Qty Description
K 4 5/16" HEX NUT
L 2 3/8" X 3" HEX BOLT
M 6 3/8" FLAT WASHER
N 6 3/8" LOCK WASHER
O 1 BACKBOARD SUPPORT PLATE
P 8 3/8" HEX NUT
Q 2 1/4" LOCKING SPRING PIN
R 6 3/8"-16 X 2-1/2" HEX BOLT
S 1 PADDING (BA803PP)
File: \INSTRUCTIONS\BA803INS
1
Customer Service
(800) 247-7668
.
Ref#:930366