Battery Switch (If Equipped With Two Batteries) - Maxum 2400 SR3 Owner's Manual

Chapter 10: Electrical System

Battery Switch (If Equipped With Two Batteries)

• Never disconnect the battery cables or turn Off the battery switch while the engine is run-
ning as this can cause damage to your boat's electrical components
Since the batteries are dealer-installed. Make sure you get a full explanation of the battery
switch use from your selling dealer.
• "Stand-by Loads", such as the the automatic bilge
pump, and the stereo memory, are not affected by the
battery switch. Stand-by loads bypass the battery
switch and are wired directly to the battery.
• Turn the battery switch to the Off position whenever
the boat will be unoccupied for long periods of time.
BATTERY SWITCH
POSITIONS
POSITION
"1"
POSITION
"2"
"BOTH"
POSITION
48
! CAUTION
NOTICE
ENGINE
ACCESSORIES & LIGHTS
STARTING
Battery 1
Provides
Starting Power
Battery 2
Provides
Starting Power
BOTH Batteries BOTH Batteries Provide Power for
Provide Accessories and Lights (not
Starting Power advised unless engine is running)
BATTERY
SWITCH
Battery 1
Provides Power for
Accessories and Lights
Battery 2
Provides Power for
Accessories and Lights
ENGINE
ALTERNATOR
Charges
Battery 1
Charges
Battery 2
Charges
BOTH Batteries