Introduction - ABB FSK II + Operating And Maintenance Manual

PRODUCT FAMILY: FSK II + - OPERATING AND MAINTENANCE MANUAL PRODUCT FAMILY: FSK II + - OPERATING AND MAINTENANCE MANUAL
4 4
—

2. Introduction

The pictures and diagrams that are contained in
this document are intended to illustrate this
content and make it as understandable as
possible; they can differ from the contractual
content of the materials supplied through the
use of different components and elements.
2.1. Improvement Policy
During the preparation of this document, we have
placed special attention to understandability and
completeness.
It is our aim to continuously improve the quality of
our documentation. We therefore welcome your
opinion and would be pleased if you would
communicate suggestions for improvement to
your local ABB representatives.
2.2. Notice
It is important that this document is stored in a
safe place during the entire service life of the
installation or device; it should be passed on to
any subsequent owners or operators. When
ordering additional documentation, please
specify the corresponding reference number of
the document, its revision and publication date.
2.3. Standards and Regulations
2.3.1. Device
The device conforms to the provisions of the
following publications:
• EN 60694: Common Specifications for High-
Voltage Switchgear
• EN 50152-1: Railway Applications; Fixed
Installations – Particular Requirements for AC
Switchgear - Part 1: Single-Phase Circuit Breakers
with Um above 1 kV
• EN 50152-2: Part 2
• EN 50124
• IEC 62271-100
2.3.2. Installation and Operation
For installation and operation, the corresponding
pertinent provisions are to be taken into
consideration, in particular:
• HD 637: Power Installations exceeding 1 kV AC
• EN 50110-1: Operation of Electrical Installations
• Regulations for the prevention of accidents of the
employer's liability insurance associations or
comparable organisations
• Safety guidelines for auxiliary and operating
materials
• Order-related specifications of ABB