Information Codes - Samsung NV75A667 Series User & Installation Manual

Troubleshooting
Problem
Steam cleaning • This is because the
does not work. temperature is too high.
Dual cook mode • If the divider is not
does not work. properly assembled
Single cook mode • If the divider is inserted
in the oven.
does not work.
The fan of the • For the best cooking
cavity, that is not performance and results,
being used in Dual fan and the heater of the
cook, is operating cavity that is not being
(or the temperature used may operate.
of the cavity is hot).
48 English
NV75A6679RS_EU_DG68-01361H-00_EN.indd 48 NV75A6679RS_EU_DG68-01361H-00_EN.indd 48
Cause Action
• Let the oven cool and
then use.
• Insert the divider
correctly and use.
• Take out the divider and
use.
• This is not a product
malfunction, so there is
no need to worry.

Information codes

If the oven fails to operate, you may see an information code on the display. Check
the table below and try the suggestions.
Code Meaning
C-d1 Door lock malfunctions
C-20
C-21
Sensor malfunctions
C-22
C-23
Only occurs during EEPROM Read/
C-F1
Write
If there is no communication
C-F0
between the main PCB and sub PCB
Occurs when a communication
C-F2 problem is maintained between the
Touch IC <-> Main or Sub micom
Button problem
C-d0 Occurs when a button is pressed and
held for a period of time.
Action
Turn off the oven and then
restart. If the problem
continues, turn off all power
for 30 seconds or more and
then reconnect. If the problem
is not fixed, please contact a
service centre.
Turn off the oven and then
restart. If the problem
continues, turn off all power
for 30 seconds or more and
then reconnect. If the problem
is not fixed, please contact a
service centre.
Clean the buttons and make
sure there is no water on/
around them. Turn off the
oven and try again. If the
problem continues, contact a
local Samsung service centre.
2021-03-09 오후 5:35:23 2021-03-09 오후 5:35:23