Table of Contents
Advertisement
Operations
WARNING
Do not open the door before the cycle is complete. The water inside the oven is
very hot, and it can cause a burn.
NOTE
• If the oven is heavily soiled with grease, for example, after roasting or grilling,
it is recommended to remove stubborn soils manually using a cleaning agent
before activating Steam cleaning.
• Leave the oven door ajar when the cycle is complete. This is to allow the
interior enamel surface to dry thoroughly.
• If the oven is hot inside, cleaning is not activated. Wait until the oven cools
down, and try again.
• Do not pour water onto the bottom by force. Do it gently. Otherwise, the water
overflows to the front.
26 English
NV75A6679RS_EU_DG68-01361H-00_EN.indd 26
NV75A6679RS_EU_DG68-01361H-00_EN.indd 26
3. Turn the Mode Dial (or Value Dial for
NV75A667*** models) to select Steam
Clean, and then tap OK to start cleaning.
Steam cleaning runs for 26 minutes.
4. Use a dry cloth to clean inside the oven.
Pyrolytic
Pyrolytic features high temperature thermal cleaning. It burns off oily leftovers to
facilitate manual cleaning.
NOTE
The Pyrolytic function is available for NV75A667*** model only.
1. Remove all accessories, including the
2. Turn the Mode Dial to select Cleaning.
3. Turn the Value Dial to select Pyrolytic,
4. Turn the Value Dial to select a cleaning
5. Tap OK to start cleaning.
6. When complete, wait until the oven cools
side runners, and wipe out large pieces
of impurities manually from inside the
oven. Otherwise, they may cause flames
during the cleaning cycle, resulting in a
fire.
and then tap OK.
time from 3 levels: 1 hr 50 min, 2 hr
10 min, and 2 hr 30 min.
down, and then wipe the door along its
edges using a wet cloth.
2021-03-09 오후 5:35:16
2021-03-09 오후 5:35:16
Advertisement
Table of Contents
