Related Manuals for AQUAPHOR OSMO PRO 50
Summary of Contents for AQUAPHOR OSMO PRO 50
- Page 1 OSMO PRO PRO 1 PRO 1 OSMO PRO 50 OSMO PRO 100 PRO 50 PRO 100 PRO М PRO М PRO 1 PRO 1 OSMO PRO 50 EU OSMO PRO 100 EU PRO 50 PRO 100 PRO HFМ PRO HFМ...
- Page 2 100 EU Please read these instructions carefully and keep them for future reference. The water purifier AQUAPHOR OSMO Pro (hereinafter referred to as OSMO Pro) was manufactured by Manufacturer: Aquaphor International OÜ, L. Tolstoi 2A, Sillamäe, Estonia, 40231. www.aquaphor.com OSMO Pro is designed for deep purification of drinking water from mechanical and colloidal parti- cles, organic impurities, viruses, bacteria and protozoa*.
- Page 3 Pro Сartridges Pro 1. Mechanical • Pro 50 capacity: 190 liters (50 gallons) per day.* and sorption filtration • Pro 100 capacity: 380 liters (100 gallons) per day.* • Combines mechanical and sorption filtration in one cartridge. * Based on standard membrane testing. •...
-
Page 4: Delivery Set
Maximum productivity (at a water temperature of +25 °C OSMO Pro 50/ OSMO Pro 100/ and a pressure of 0.39 MPa) OSMO Pro 50 EU OSMO Pro 100 EU 7.8 l / h 15,6 l / h Clean water collection time in the storage tank (depending on 60–120 minutes... - Page 5 How OSMO Pro works Housing consists of a body in which three collectors are fixed for connecting replacement filter cartridges and automatic valves. Water treatment unit, including the Pro 1 cartridge, purifies water from mechanical suspensions, active chlorine, oil products, phenols, pesticides, chloroform and heavy metals, colloidal and dissolved iron. Reverse osmosis unit.
- Page 6 11. Small rubber gasket 24. Co commended to contact the service department 12. Plastic lock washer of Aquaphor or regional dealers of Aquaphor................... Installing OSMO PRO* 1. For installation you will need: a drill, drill bits 7 mm and 12 mm, an adjustable wrench, a screwdriver, a tubular wrench 14 mm.
- Page 7 lation diagram 13. Metal lock washer 25. Inlet connection 14. Fixing nut 26. Retaining clips 15. Union nut 27. Sealing gasket 16. Drain tube (black) 17. Drain clamp 18. Stand for the storage tank 19. Storage tank 20. Storage tank tap 21.
- Page 8 Installing the connection node How to disconnect tubes Pull the retaining clip out from under the plastic ................... sleeve and, by pressing the end of the plastic ATTENTION! The end of the pipeline to which sleeve with a wrench (included in the water pu- the connection unit is connected must be flat.
-
Page 9: Preparation For Work
Preparation for work Flushing OSMO PRO • Close the tap (20) on the storage tank (the tap flag must be turned perpendicular to the At the last stage of the preparation of premium outgoing tube) and open the inlet tap on the drinking water in OSMO Pro, a natural mineral connection unit (23). - Page 10 Changing the replacement cartridges Replacing the membrane The service life of the membrane cartridge (3) de- pends on the performance of the water treatment cartridge unit (2), therefore it is very important to replace the Pro 1 cartridge in a timely manner. •...
-
Page 11: Installation
Aquaphor or regional dealers of ed to use the water purifier only with Aquaphor. The manufacturer is not microbiologically safe water. Do not... -
Page 12: Manufacturer Warranty
Manufacturer warranty The service life of OSMO Pro (excluding replace- The warranty period for OSMO Pro (except for able filter cartridges) is 5 years* from the date replaceable filter cartridges) is 1 year from the of production**. At the end of its service life, the date of sale. -
Page 13: Fault Table
Fault table Malfunction Cause Elimination method There is no clean water or there The cartridge of the preliminary Replace the pre-treatment is not enough of it. water treatment unit is clogged cartridge The storage tank fills slowly Membrane cartridge is clogged Replace membrane cartridge or does not fill at all The water conditioning unit cartridge... - Page 16 Manufacturer: Aquaphor International OÜ, L. Tolstoi 2A, Sillamäe, Estonia, 40231. www.aquaphor.com Aquaphor water filter model: OSMO Pro 50 OSMO Pro 50 EU OSMO Pro 100 OSMO Pro 100 EU The model number and the date of manufacture and quality control are indicated on the product's serial number label on this page.
Need help?
Do you have a question about the OSMO PRO 50 and is the answer not in the manual?
Questions and answers