Safety Policy - Seco SBC-C57 User Manual

Single board computer with the nxp i.mx 8x processors on 3.5" form factor

Table of Contents

1.7 Safety Policy

In order to meet the safety requirements of EN62368-1:2014 standard for Audio/Video, information and communication technology equipment, the SBC-C57 Module

shall be:

used exclusively with limited power sources, which cannot exceed 100W even in fault conditions;

used along with CPU Heat-spreader/heatsinks designed according to the thermal characteristics indicated in the par. 2.2 and to the mechanical

characteristics indicated in par. 2.4.

installed inside an enclosure compliant to all applicable requirements of the above-mentioned standard;

installed in a way that prevents the access to the board from children

The manufacturer which includes an SBC-C57 module in his end-user product shall:

verify the compliance with B.2 and B.3 clauses of the EN62368-1 standard when the module works in its own final operating condition.

provide an instructional safeguard against thermal injuries, according to clause 9.4.2 of the above mentioned standard. This instructional safeguard must be

placed both on end-user product's User Manual and on the product itself (Danger Label, it must be placed near the CPU or its heatsink).

The board shall be powered by a Power Supply Unit separately approved and classified ES1/PS2 according to the requirements of IEC EN 62368-1.

SBC-C57

Table of Contents