Changing Print Options - Toshiba E-STUDIO2000AC Operator's Manual

1.USING THE AirPrint FUNCTION
5 Change any print options as necessary and tap [Print].
For more information about print options, see the following page.
 P.24 "Changing print options"
Printing starts.
 Changing print options
You can change the following print options as necessary.
 Some print options cannot be changed depending on the applications used or the data type of the document.
 Whether a document is printed in the Full Color mode or the Gray Scale mode depends on the applications used or
the data type of the document.
 Printer
This selects a printer to be used for printing.
 Copy
This sets the number of printed copies.
 Range
This sets a range of pages to be printed. This can be set only when the document is a PDF file.
 Double-sided
This sets whether or not you want to print on both sides of paper.
This function is available only when the Automatic Duplexing Unit is installed in the equipment.
 Staple
This sets whether or not your want to staple sets of paper.
 This function is available only when the Finisher is installed in the equipment.
 For the e-STUDIO5008LP Series, this function is available only when [Black] is selected in the toner mode initial
setting.
24 Printing from iOS Devices