Before Using The Airprint Function; Airprint Requirements; Considerations And Limitations - Toshiba E-STUDIO2000AC Operator's Manual

Before Using the AirPrint Function

0.
AirPrint refers to a function to print, fax, or scan documents from a computer which runs macOS or a device which
runs iOS through a multifunctional digital system that exists under the same subnetwork as that for such a computer
or device. AirPrint also allows you to print with USB connection. You do not need to install a printer driver in your
computer or device in advance.
 AirPrint requirements
 macOS requirements
To print or fax a document from your macOS using AirPrint, you need the following:
 Latest version of macOS
 AirPrint printer
To scan a document from your macOS using AirPrint, you need the following:
 Latest version of macOS
 AirPrint scanner
 iOS requirements
To print a document from your iOS device using AirPrint, you need one of the following devices with the latest version
of iOS:
 iPad (4th generation or later)
 iPad Air (all models)
 iPad Pro (all models)
 iPad mini (Mini2 or later)
 iPhone (5 or later)
 iPod touch (6th generation or later)
 Considerations and limitations
 If you want to use the Wireless LAN Module (optional), be sure to complete the wireless LAN settings in advance. For
more information about wireless LAN settings, refer to the MFP Management Guide.
 Make sure that [Enable] is set for the following settings on the TopAccess menu.
- [Enable Bonjour]
- [Enable IPP]
- [Enable AirPrint]
For more information about [Enable Bonjour] and [Enable IPP], refer to the TopAccess Guide. For [Enable AirPrint],
refer to the following page in this guide:
 P.26 "Enabling or Disabling AirPrint"
 If you want to use the AirPrint function through equipment in which the Super Sleep function has been enabled,
select the [AirPrint Discovery for IPv4]/[AirPrint Discovery for IPv6] check boxes in [Wake Up Setting] under [Energy
Save] of [General settings] from [Administration] tab of TopAccess. For the details, refer to the following page in
this guide:
 P.28 "Recovery setting from Super Sleep mode"
 To use the user authentication function, navigate to the [Administration] tab > [Setup] > [Print Service] > [IPP Print],
and then select [Enable] for [Enable SSL] and [Basic] for [Authentication]. For the details, refer to the following
page in this guide:
 P.28 "Settings for using AirPrint when the user authentication is enabled"
 The AirPrint function cannot be used in equipment in which the department code function has been enabled. For
more information about the department code function, refer to the TopAccess Guide.
 The AirPrint function is not enabled in the High Security mode. For more information about the High Security
mode, refer to the High Security Mode Management Guide.
 Some black and white data may be handled as color data, depending on the specifications of the applications you
use.
 The encrypted PDF files cannot be printed from a device with iOS installed.
6 Before Using the AirPrint Function