Autopilot Outputs - Garmin GPS 175 Pilot's Manual

Navigation

3.21.10 Autopilot Outputs

CAUTION
ENGAGE THE AUTOPILOT HEADING MODE AND SET THE HEADING BUG
APPROPRIATELY TO USE THE AUTOPILOT ON HEADING LEGS USING THE
AUTOPILOT'S NAV, GPSS, OR APR MODE. NOT ALL AUTOPILOTS FOLLOW
GUIDANCE ON THESE LEG TYPES, SOME REVERT TO A ROLL ONLY OR WINGS
LEVEL MODE.
FEATURE REQUIREMENTS
•
Availability dependent upon configuration
FEATURE LIMITATIONS
•
Applicable to King KAP 140 and KFC 225 autopilots
Outputs for the King KAP 10/KFC 225 autopilot units require manual activation.
If configured, this function prompts you to enable autopilot outputs during the
approach procedure.
Once enabled, the unit provides guidance information consistent with what the
autopilot expects (i.e., angular CDI scaling and glideslope capture for LPV or other
vertically guided GPS approaches).
ENABLE AUTOPILOT OUTPUTS
1. Acknowledge the advisory message.
2. Tap Enable APR Output.
3. Follow the unit provided guidance.
3-82
Enable APR Output Advisory
GPS 175/GNX 375 Pilot's Guide 190-02207-02 Rev. B