Troubleshooting - Black & Decker BEBLV260 Manual

ENGLISH
Warning! Never operate in Blow mode without the blow tube
♦ Hold the blow tube approximately 180 mm above the
ground, switch on the appliance and using a sweeping
motion from side to side, advance slowly keeping the
accumulated debris/leaves in front of you (fig. O ).
♦ Once you have blown the debris/leaves into a pile, you
can remove the blow tube assembly by inserting the
rod (12) into the aperture on the vacuum head (13) and
pushing down to release the lock as shown in figure P.
♦ Now you can convert to vacuum mode and collect the
debris.

Troubleshooting

Problem Possible solution
Check the connection to the power supply
Check the fuse in the plug, if blown, replace
(UK only).
Check that the blow/vacuum tube assembly
Failure to operate
is correctly fitted to the powerhead.
If the fuse continues to blow - immediately
disconnect from the mains power supply
and consult your local BLACK+DECKER
authorised repair agent.
Switch off - disconnect from the mains power
supply, debris should fall clear of the tube.
Remove and empty the collection bag.
Check that both the inlet and exit ports on the
Poor vacuum/high pitched vacuum tube are clear.
whine
Remove any debris from the fan area.
If poor vacuuming continues - immediately
disconnect from the mains power supply
and consult your local BLACK+DECKER
authorised repair agent
Maintenance
Your BLACK+DECKER appliance has been designed
to operate over a long period of time with a minimum of
maintenance.
Continuous satisfactory operation depends upon proper
appliance care and regular cleaning.
♦ Keep the appliance clean and dry.
♦ Remove any leaves stuck to the inside of the vacuum
tube.
♦ Regularly clean the ventilation slots with a clean, dry
paint brush.
♦ Regularly clean the collection bag and ensure that it is
clean and empty after each use.
♦ To clean the appliance, use only mild soap and a damp
cloth. Never let any liquid get inside the tool and never
immerse any part of the tool into liquid. Do not use any
abrasive or solvent-based cleaner.
♦ Self lubricating bearings are used in your product,
therefore lubrication is not required.
14
Mains plug replacement (U.K. & Ireland only)
If a new mains plug needs to be fitted:
♦ Safely dispose of the old plug.
♦ Connect the brown lead to the live terminal in the new
plug.
♦ Connect the blue lead to the neutral terminal.
Warning! No connection is to be made to the earth terminal.
Follow the fitting instructions supplied with good quality
plugs.
Recommended fuse: 13 A.
Protecting the environment
Separate collection. Products and batteries
marked with this symbol must not be disposed of
with normal household waste.
Products and batteries contain materials that can
be recovered or recycled reducing the demand for
raw materials.
Please recycle electrical products and batteries
according to local provisions. Further information
is available at www.2helpU.com
Technical data
Input voltage
Power Input
Capacity
Weight (blower)
Weight (vacuum)
Level of sound pressure according to EN 50636-2-100
Sound pressure level at the operator position: (L
(K) 1.2 dB(A)
Sound power level (L ) 102.5 dB(A), uncertainty (K) 1.1 dB(A)
WA
Vibration total values (triax vector sum) according to EN 50636-2-100
Vibration (a ) 2.5 m/s , uncertainty (K) 1.5 m/s
2
h
BEBLV260
V 230
AC
W 2600
L 40
kg 3.6
kg 4.4
) 90.0 dB(A), uncertainty
pA
2