Electrical Safety; After Use - Black & Decker BEBLV260 Manual

ENGLISH
♦ Disconnect the plug from the
power source and/or the battery
pack from the appliance before
making any adjustments,
changing accessories, or storing
appliances. Such preventive
safety measures reduce the
risk of starting the appliance
accidentally.
♦ Where applicable, keep cutting
tools sharp and clean. Properly
maintained cutting tools with
sharp cutting edges are less
likely to bind and are easier to
control.
♦ Do not use the appliance if any
part is damaged or defective.
♦ Have any damaged or defective
parts repaired or replaced by an
authorised repair agent.
♦ Never attempt to remove or
replace any parts other than
those specified in this manual.

Electrical safety

♦ Appliance plugs must match the
outlet. Never modify the plug in
any way. Do not use any adapter
plugs with earthed (grounded)
appliance. Unmodified plugs and
8
matching outlets will reduce risk
of electric shock.
♦ Do not expose appliance to rain
or wet conditions. Water entering
a appliance will increase the risk
of electric shock.
♦ Do not abuse the cord. Never
use the cord for carrying, pulling
or unplugging the appliance.
Keep cord away from heat, oil,
sharp edges or moving parts.
Damaged or entangled cords
increase the risk of electric
shock.
♦ When operating an appliance
outdoors, use an extension cord
suitable for outdoor use. Use of
a cord suitable for outdoor use
reduces the risk of electric shock.
♦ If operating an appliance in
a damp location is unavoidable,
use a Residual Current Device
(RCD) protected supply. Use
of an RCD reduces the risk of
electric shock.

After Use

♦ When not in use, the appliance
should be stored in a dry, well
ventilated place out of the reach
of children.