Table of Contents
Advertisement
ENGLISH
Position the vacuum tube slightly above the debris/leaves.
u
Switch on the appliance and use a sweeping motion; the
debris/leaves will be sucked up the tube, shredded and
thrown into the collection bag (fig. K).
As the bag fills, the power of the suction will decrease,
u
switch off the appliance and unplug from the mains power
supply.
Unzip the bag to empty the contents before continuing to
u
operate.
Warning! Never remove the collection bag without first turning
off and unplugging the appliance.
Note: If the suction decreases and the bag is not full, the
vacuum tube is probably clogged with debris. Turn off and
unplug the vacuum and clear the tube before continuing.
Troubleshooting
Problem
Check the connection to the power supply
Check the fuse in the plug, if blown, replace (UK
only).
Check that the blow/vacuum tube assembly is
Failure to operate
correctly fitted to the powerhead.
If the fuse continues to blow - immediately
disconnect from the mains power supply and consult
your local BLACK+DECKER authorised
repair agent.
Switch off - disconnect from the mains power
supply, debris should fall clear of the tube.
Remove and empty the collection bag.
Check that both the inlet and exit ports on the
Poor vacuum/high
vacuum tube are clear.
pitched whine
Remove any debris from the fan area
If poor vacuuming continues - immediately
disconnect from the mains power supply and
consult your local BLACK+DECKER authorised
repair agent
Switch off - disconnect from the mains power
supply and remove the collection bag.
Remove the vacuum tube and inspect the
fan.
Poor shredding
Clean any debris from the fan blades.
If the fan is cracked or damaged, do not use
- consult your local BLACK+DECKER
authorised repair agent.
Maintenance
Your BLACK+DECKER appliance has been designed
to operate over a long period of time with a minimum of
maintenance.
Continuous satisfactory operation depends upon proper
appliance care and regular cleaning.
Keep the appliance clean and dry.
u
Remove any leaves stuck to the inside of the vacuum
u
tube.
Regularly clean the ventilation slots with a clean, dry paint
u
brush.
10
(Original instructions)
Possible solution
Regularly clean the collection bag and ensure that it is
u
clean and empty after each use.
To clean the appliance, use only mild soap and a damp
u
cloth. Never let any liquid get inside the tool and never
immerse any part of the tool into liquid. Do not use any
abrasive or solvent-based cleaner.
Self lubricating bearings are used in your product,
u
therefore lubrication is not required.
Mains plug replacement (U.K. & Ireland only)
If a new mains plug needs to be fitted:
Safely dispose of the old plug.
u
Connect the brown lead to the live terminal in the new
u
plug.
Connect the blue lead to the neutral terminal.
u
Warning! No connection is to be made to the earth terminal.
Follow the fitting instructions supplied with good quality plugs.
Recommended fuse: 13 A.
Protecting the environment
Separate collection. Products and batteries marked
with this symbol must not be disposed of with
normal household waste.
Products and batteries contain materials that can be
recovered or recycled reducing the demand for raw materials.
Please recycle electrical products and batteries according to
local provisions. Further information is available at
www.2helpU.com
Technical data
Input voltage
Power Input
Capacity
Weight (blower)
Weight (vaccum)
Input voltage
V
AC
Power Input
W
Capacity
I
Weight (blower)
Kg
Weight (vaccum)
Kg
Vibration total values (triax vector sum) according to EN 50636-2-100
Vibration (a
) 9.8 m/s
h
BDBV30 (type 2)
V
230
AC
W
3000
I
50
Kg
3.7
Kg
4.9
GW2810
GW3030
GW3050
GW2838
(type 2)
(type 2)
(type 2)
230
230
230
2800
3000
3000
50
50
50
3.45
3.7
3.7
4.85
4.85
4.85
, uncertainty (K) 1.5 m/s
2
2
Advertisement
Table of Contents
