Table of Contents
Advertisement
and marked accordingly. Up to 30 m
of 1.5 mm² HO5V V-F extension cable
can be used without loss of product
performance. Before use, inspect the
extension cable for signs of damage,
wear and ageing. Replace the extension
cable if damaged or defective. When
using a cable reel, always unwind the
cable completely.
Labels on appliance
The following warning symbols are found on the appliance
along with the date code:
Read the manual prior to operation.
Wear safety glasses or goggles when oper-
ating this appliance.
Wear suitable ear protectors when operating
this appliance.
Always remove the plug from the mains
before cleaning or maintenance. Be careful
not to use your appliance if the cable is
damaged.
Disconnect the mains plug if the cord
becomes damaged or entangled.
Beware of fl ying objects. Keep bystanders
away from the cutting area.
K
Do not expose the appliance to rain or high
R
humidity.
Directive 2000/14/EC guaranteed sound
100
power.
Features
This appliance includes some or all of the following features.
1. On / Off Switch
2. Blower Tube
(Original instructions)
To fi t the blower tube
Attach the blower tube (2) to the blower main body by
placing the tabs (2b) into the recesses (2a). To remove the
blower tube, depress the tabs (2a) and pull apart.
Switching on and off
Warning! Use both hands to grip the product fi rmly when
switching on.
Warning! Do not point unit discharge at self or bystanders.
To switch the sweeper on, slide the on/off switch forward
as shown B.
To switch the sweeper off, slide the on/off switch back.
Operation
Warning! Always wear safety glasses. Wear a fi lter mask
if the operation is dusty. Use of gloves, long pants and
substantial footwear is recommended. Keep long hair and
loose clothing away from openings and moving parts.
THIS SWEEPER IS FOR HOUSEHOLD USE ONLY.
Hold the sweeper with one hand as shown in Figure
C and sweep from side to side with the nozzle several
inches above the ground. Slowly advance keeping the
accumulated pile of debris in front of you.
Troubleshooting
Problem
Possible solution
Check the connection to the power supply
Check the fuse in the plug, if blown, replace
(UK only).
Check that the blower tube assembly is
Failure to operate
correctly fi tted to the powerhead.
If the fuse continues to blow - immediately
disconnect from the mains power supply and
consult your local BLACK+DECKER authorised
repair agent.
Protecting the environment
Separate collection. Products and batteries
marked with this symbol must not be disposed of
Z
with normal household waste.
Products and batteries contain materials that can be
recovered or recycled reducing the demand for raw materials.
Please recycle electrical products and batteries according to
local provisions.
ENGLISH
(fi g. A)
7
Advertisement
Table of Contents
