Reels; Storage - Quectel L76 Hardware Design

8.1.2. Reels

Each reel contains 500 Quectel GNSS modules. See the figure above.
Table 9: Reel Packaging
Model Name MOQ
L76/L76-L
500 pcs
/L76-L(L)

8.2. Storage

The modules are provided in the vacuum-sealed packaging. MSL of the modules is rated as 3. The
storage requirements are listed below.
1. Recommended storage conditions: The temperature should be 23 ± 5 ° C and the relative humidity
should be 35–60 %.
2. The storage life (in vacuum-sealed packaging) is 12 months in Recommended Storage Condition.
3. The floor life of the modules is 168 hours
humidity is below 60 %. After the vacuum-sealed packaging is removed, the modules must be
processed in reflow soldering or other high-temperature operations within 168 hours. Otherwise, the
modules should be stored in an environment where the relative humidity is less than 10 % (e.g., a
drying cabinet).
4. The modules should be pre-baked to avoid blistering, cracks and inner-layer separation in PCB under
the following circumstances:
⚫
The modules are not stored under Recommended Storage Condition;
⚫
Violation of the third requirement above occurs;
⚫
Vacuum-sealed packaging is broken, or the packaging has been removed for over 24 hours;
⚫
Before module repairing.
5
This floor life is only applicable when the environment conforms to IPC/JEDEC J-STD-033. It is recommended to start the
solder reflow process within 24 hours after the package is removed if the temperature and moisture do not conform to, or
are not sure to conform to IPC/JEDEC J-STD-033. And do not remove the packages of tremendous modules if they are not
ready for soldering.
L76&L76-L_Hardware_Design
Minimum Package (MP): 500 pcs
Size: 370 mm × 350 mm × 56 mm
N.W: 0.25 kg
G.W: 1.0 kg
5
in a plant where the temperature is 23 ± 5 ° C and relative
GNSS Module Series
Minimum Package x 4 = 2000 pcs
Size: 380 mm × 250 mm × 365 mm
N.W: 1.1 kg
G.W: 4.4 kg
51 / 59