Declaration Of Conformity, Legacy Hardware - Measurement Computing USB-PDISO8/40 User Manual

Declaration of Conformity, Legacy Hardware

Manufacturer:
Address:
Category: Electrical equipment for measurement, control and laboratory use.
Measurement Computing Corporation declares under sole responsibility that the product
to which this declaration relates is in conformity with the relevant provisions of the following standards or other
documents:
EU EMC Directive 89/336/EEC: Electromagnetic Compatibility, EN 61326 (1997) Amendment 1 (1998)
Emissions: Group 1, Class A
EN 55011 (1990)/CISPR 11: Radiated and Conducted emissions.

Immunity: EN61326, Annex A
IEC 61000-4-2 (1995): Electrostatic Discharge immunity, Criteria C.

IEC 61000-4-3 (1995): Radiated Electromagnetic Field immunity Criteria A.

IEC 61000-4-4 (1995): Electric Fast Transient Burst immunity Criteria B.

IEC 61000-4-5 (1995): Surge immunity Criteria B.

IEC 61000-4-6 (1996): Radio Frequency Common Mode immunity Criteria A.

IEC 61000-4-8 (1994): Power Frequency Magnetic Field immunity Criteria A.

IEC 61000-4-11 (1994): Voltage Dip and Interrupt immunity Criteria A.

Declaration of Conformity based on tests conducted by Chomerics Test Services, Woburn, MA 01801, USA in
June, 2007. Test records are outlined in Chomerics Test Report # EMI4813.07.
We hereby declare that the equipment specified conforms to the above Directives and Standards.
Carl Haapaoja, Director of Quality Assurance
*The board revision may be determined from the part number label on the board that states "197241X-01L", where X is the
board revision.
Measurement Computing Corporation
10 Commerce Way
Norton, MA 02766
USA
USB-PDISO8/40, Product Revisions up to B*