Yale MPC080-VG Service Manual page 18

0620 YRM 1283
This section contains repair and maintenance
procedures for the AC traction motor. Additional
information concerning the traction motor may be
included in other sections when the information is
more closely related to other systems. Sections that
may contain related information include:
• Periodic Maintenance 8000YRM1298 for unit
codes B890 and B896
• Periodic Maintenance 8000YRM1368 for unit
codes B902, B903, B904, and B905
• Periodic Maintenance 8000YRM1453 for unit
codes A287 and A292
• Periodic Maintenance 8000YRM1635
for unit codes C902 and C903
• Periodic Maintenance 8000YRM1644
for unit codes B287, B292, and C896
• Steering Mechanism 1600YRM1284 for unit
codes B890 and B896
• Steering Mechanism 1600YRM1031 for unit
codes B902, B903, B904, and B905
• Steering Mechanism 1600YRM1449 for unit
codes A287 and A292
• Steering Mechanism 1600YRM1627
for unit codes C902 and C903
• Steering Mechanism 1600YRM1637
for unit codes B287, B292, and C896
• Electrical System 2200YRM1287 for unit
codes B890 and B896
• Electrical System 2200YRM1357 for unit
codes B902, B903, B904, and B905
• Electrical System 2200YRM1451 for unit
codes A287 and A292
• Electrical System 2200YRM1632
for unit codes C902 and C903
• Electrical System 2200YRM1640
for lift truck models B287, B292, and C896
• Master Drive Unit * (With EPAS)
0630YRM0961 for all models in this section
• Master Drive Unit 0630YRM1609
for unit codes B287, B292, and C896
General
ACCESSING THE DRIVE UNIT
COMPARTMENT
MPE060/080-F, MPE060-VG, and MPE080-VG
The drive unit compartment is concealed behind a
molded cover which fits securely around the drive unit
and steer support to the frame. The floor mat fits
snugly in the operator platform after the drive unit
cover is installed.
To remove the drive unit cover, first lift the corners of
the floor mat and pull it out away from the drive unit.
See Figure 1. Next, reach under the side of the drive
unit cover, near the bottom, and find the grip slot.
With both hands, pull up and away from the truck until
the bottom of the cover kicks out from the retaining
clips. See Figure 2 or Figure 3. Repeat this for the
other side of the cover. Work around the edge of the
cover until free from the truck.
1. FLOOR MAT
2. DRIVE UNIT COMPARTMENT COVER
3. FRAME
4. CASTER ADJUSTMENT ACCESS
Figure 1. Floor Mat
General
1