Table of Contents
Advertisement
7. The Console (5) can use four 1.5V "D" batteries
(not included); alkaline batteries are recom-
mended. IMPORTANT: If the Console has
been exposed to cold temperatures, allow it
to warm to room temperature before insert-
ing batteries. Otherwise, you may damage
the console displays or other electronic
components. Press the tabs on the battery
covers, and remove the battery covers. Next,
insert batteries into the battery compartments.
Make sure to orient the batteries as shown
by the diagrams inside the battery compart-
ments. Then, attach the battery covers.
To purchase an optional AC adapter, contact
the store where you purchased this product
or call the telephone number on the cover of
this manual. To avoid damaging the console,
use only a manufacturer-supplied AC
adapter. Plug one end of the AC adapter into
the jack on the console; plug the other end into
an outlet installed in accordance with all local
codes and ordinances.
8. Have another person hold the Console (5) near
the Upright (4).
Connect the wires on the Console (5) to the
Wire Harness (40). Insert the excess wiring
downward into the Upright (4).
Tip: Do not pinch the wires during this step.
Start all screws before tightening any of
them. Attach the Console (5) to the Upright (4)
with four M4 x 16mm Screws (62).
All manuals and user guides at all-guides.com
9
7
Tab
Batteries
8
5
Console
Wires
Tab
Battery
Covers
5
Batteries
Avoid pinching
the wires
4
40
62
62
Advertisement
Table of Contents
