Weslo Pursuit CT 5.9 User Manual page 10

9. Slide the Bottom Handlebar Cover (55) upward
into the back of the Console (5) and around the
Handlebar (28) as shown.
Attach the Bottom Handlebar Cover (55) to the
Handlebar (28) with two M4 x 16mm Screws
(62).
Next, attach the Top Handlebar Cover (29) to
the Handlebar (28) and the Bottom Handlebar
Cover (55) with an M4 x 16mm Screw (62).
10. Tip: Avoid pinching the Pulse Wire (38)
during this step.
Orient the Pulse Bar (7) as shown. Attach the
Pulse Bar to the Seat Carriage (6) with two M10
x 36mm Bolts (57) and two M10 Locknuts (58).
Do not tighten the Bolts yet.
All manuals and user guides at all-guides.com
10
9
5
28
55
62
10
Avoid pinching the
7
38
6
57
57
29
Pulse Wire (38)
58