Nmea 0183 Access - ADF Web HD67948-2-A1 User Manual

Industrial Electronic Devices

NMEA 0183 ACCESS:

By pressing the "NMEA 0183
appears (Fig. 4).
The NMEA 0183 sentences inserted in this table contain the output data of MQTT. These sentences are accepted by the converter.
Figure 4: "Definition of NMEA 0183 Sentences" window
The data of the columns have the following meanings:
If the field "Enable" is checked, the NMEA 0183 sentence is enabled;
In the field "Sentence" the NMEA 0183 sentence is defined;
In the field "Index" the Index of the NMEA 0183 sentence is defined;
In the field "Data Field" the parameter of the selected sentence to map on MQTT side is defined;
In the field "Post operation" the post operation on the data received is defined;
If the field "Swap All" is checked, the bytes order on MQTT side will be reversed;
If the field "Swap 16" is checked, a swap by word will be applied;
In the field "Position" the byte of the memory array where mapping the data is defined;
In the field "Mnemonic" a brief description is defined.
ADFweb.com S.r.l.
Access" button from the main window for SW67948 (Fig. 2) the "Definition of NMEA 0183 Sentences" window
User Manual NMEA 1083 / MQTT
Document code: MN67948_ENG Revision 1.000 Page 22 of 30