Function / 3. Function setting contents
CHAPTER 2
3.23 Automatic ventilation mode setting
Refer to "Ventilation mode control" (C-43)
3.24 Automatic mode setting 1)
Outdoor and indoor temperature difference
Refer to "Ventilation mode control" (C-44)
3.25 Automatic mode setting 2)
The lowest outdoor temperature
Refer to "Ventilation mode control" (C-44)
3.26 Automatic mode setting 3)
The lowest indoor temperature setting
Refer to "Ventilation mode control" (C-44)
3.27 Supply fan power up setting and Exhaust fan power up setting
Refer to "Fan speed control" (C-40)
3.28 Operation monitor output synchronized with exhaust fan or
supply fan
Refer to "External input / output terminal" (C-52)
3.29 Bypass monitor output or Pre-heater output setting
Refer to "External input / output terminal" (C-51)
3.30 Pre-heater output setting 1) ON temperature
Refer to "Cautions of Lossnay operation in cold region" (C-48)
3.31 Pre-heater output setting 2) OFF interval
Refer to "Cautions of Lossnay operation in cold region" (C-49)
3.32 Fan speed for air volume "High" input
Refer to "Fan speed control" (C-40).
3.33 Fan speed for air volume "Low" input
Refer to "Fan speed control" (C-40).
3.34 External fan speed input setting (0 - 10 VDC)
Refer to "External input / output terminal" (C-54).
3.35 Initialization
Set to initialize the remote controller PZ-61DR-E function setting.
All function settings which are changed by users are cancelled.
DIP-SW
Setting
check
SW No.
Setting
-
N/A
-
C-36
PZ-61DR-E
Function
Setting
No.
Data
-
0
100
-
1
Setting
Initialization
check
N/A
Available