fantastic furniture Bridge Assembly Instructions Manual page 6

Step 3
1 x Allen Key
8 x Bolts
(H1) (H3)
8 x Washers
4 x Levelling Feet
(H4) (H5)
Align the assembled legs (P2, P3) onto the table top (P1) and attach using 8 x bolts (H1)
and 8 x washers (H4), using the allen key (H3). Do not fully tighten the bolts (H1).
Attach 4 x levelling feet (H4) to the bottom of each leg (P2, P3) by screwing
clockwise until tight.
With assistance, turn the table over. Ensure the frame is stable. You may now
fully tighten all bolts (H1) using allen key (H3).
If required, the levelling feet (H4) can be adjusted by turning anti-clockwise or
clockwise as required so the table is level with the ground.
Note:We recommend assembling the table on a soft surface
tominimise the risk of damaging the table.
(H5)
(H5)
(H1)
(H4)
(H1)
(H4)
(H5)
(H3)
(H1)
(H4)
(P1)
(H1)
(H4)
(H5)
Page 6