Table of Contents
Advertisement
enable the Bi-directional scanning function. If you select "No" option (by default), it means to
enable the Uni-directional scanning function.
b. "Scanning Direction": You can select "Forward" or "Backward" option, at this moment, the
luggage can be scanned by X-ray Uni-directional only. The "Forward" option is by default.
When the "Bi-directional Scanning" function is enabled, however, the scanning direction is not
optional.
c. "Forces a Scan": It used for scanning ultra-thin goods. You can select "Yes/No" option through
the drop-down menu to enable/disable the "forces a scan" function. "No" is by default,
generally.
d. "Energy-Saving Mode": If there are no other luggage coming in 15 seconds after the last
luggage have been scanned by X-ray, then the conveyor will stop running so as to achieve the
purpose of the energy saving. You can select "Yes/No" option through the drop-down menu to
enable/disable the energy-saving mode. "No" is by default, generally.
e. "automatic calibration when logged in to system": It refers to the automatic calibration process
of equipment when logging in the system. You can select "Yes/No" option through the drop-
down menu to enable/disable the self-check function. "No" is by default, generally.
Assist Check
"Assist Check" refers to the Assist check of "Display Identification Tags", "Difficult to Penetrate", "Explosive",
"Drug" and other items, as shown in Fig 6.33.
a. "Display Identification Tags": It is equivalent to the alarm box and you can select "Display"
or "Hidden" option through the drop-down menu. If you select "Display" option, then the
position(s) of the corresponding dangerous goods will be marked with the marker boxes if
the system detects the objects difficult to penetrate, explosives or drugs (on premise that the
functions are enabled) when scanning.
b. "Difficult to Penetrate, "Explosives" and "Drugs": These options refer to the goods property
check and you can enable or disable these functions through their respective down-drop menu.
c. When you select "Close" button, the system will exist from the system setup menu.
Counter
"Counter" function module is mainly used to display the total counter, temporary counter and other
information.
Fig 6.33 Auxiliary Check Interface of System Setup
- 41 -
Chapter 6 Menu Operation
Advertisement
Table of Contents
