Table of Contents
Advertisement
Chapter 4 Equipment Operation
★ Description
Light and thin goods, dirty goods or the goods with the damaged package should be placed in
the appropriate plastic container for inspection.
★ NOTE
Be sure to place the goods to be checked outside the lead curtains! It is forbidden to
stretch your hands into the channel!
Be sure to prevent the goods to be checked from falling or accumulating at the exit of the
channel; If happen, please press the emergency stop
the special keyboard
Step 3: When you click the button
special keyboard, the conveyor begin running. Place the goods to be checked in the middle of the
conveyor so that the goods can enter on the passage by the running conveyor. When the goods to be
inspected abeing scanned in the channel, the red X-ray indicator lights on the equipment
and the special keyboard
image on the display, as shown in Fig 4.5a or Fig.4.5b.
to stop the conveyor.
are ON at the same time, and the system will display the scanned
Figure 4.5a Goods Scanning Image (Single Perspective)
Figure 4.5b Goods Scanning Image (Double Perspectives)
/
of interface or
- 13 -
buttons of the equipment or
/
button of the
Advertisement
Table of Contents
