Related Manuals for Pro Charging Systems PROView LINK Eagle Perfomance Series
Summary of Contents for Pro Charging Systems PROView LINK Eagle Perfomance Series
- Page 1 PN: 70365 Rev: 070721 PRO CHARGING SYSTEMS, LLC 1551 Heil Quaker Boulevard LaVergne, TN 37086-3539 For additional information, please call our Technical Support Group at 615.471.5300 Or email us at tech@pcsdv.com...
- Page 2 Left for iOS Devices Right for Google Play Store PLEASE REVIEW ALL SAFETY AND INSTALLATION INSTRUCTIONS ON PAGE (10-14) Page 3 Applicable Charger Models w/ Charger Spec Page 4 Charging Indicators Page 5 LED Fault Code Indicators Page 6 Other LED Indicators Page 7 Troubleshooting Tips Page 8...
-
Page 3: Battery System
*AND ANY OF THE FOLLOWING MODELS WITH ADDITIONAL LETTERS SUCH AS RM, LIFT, OB, etc.* *UNLESS OTHERWISE SPECIFIED, ALL MODELS REQUIRE AC INPUT OF 120V @ 60Hz* *UNIVERSAL MODELS ARE ABLE TO ACCEPT AC INPUT OF 100/115/230V @ 50/60Hz* *MODELS DESIGNATED AS 230V OR EUROPEAN REQUIRE AC INPUT OF 230V @ 60Hz* BATTERY CAPACITY... -
Page 4: Led Indicator
When your battery charging system is activated, the battery status indicator provides charging information utilizing two (2) indicators, three (3) LED indicators, and one (1) LED indicator. indicators are provided Four LED indicators are in order to display what provided in order to type of battery the display the progress of charger has been... - Page 5 The microprocessor is constantly monitoring the charger circuitry and will both detect and display blinking LED indications if a fault is detected. DEFAULT ALGO: INTERNAL OVER- TEMP Please contact PCS SHUTDOWN: technical support. This indication occurs (615.470.5300) if the charger circuitry has detected operat- ing temperatures in- side the charger enclosure that are above factory speci-...
- Page 6 LED indicators scrolling from first LED up to the LED, then the sequence repeats. Special fault code. Call PCS Technical Support (615.471.5300) LED indicators scrolling back and forth. First LED to LED—then from LED back down to first LED, then the sequence repeats. This indicates the unit is connected through Bluetooth.
- Page 7 No LED indicators illuminated on battery status indicator. 1. Confirm that current is being delivered to the charger. Use a meter or test light to check the AC power supply from its source through all connecting points up to the charger. 2.
- Page 8 Auto Voltage Detect Eagle Performance Series. The Pro Charging Systems’ new Auto Voltage Detection Eagle Performance Series Charger has the ability to charge both battery packs. There are no extra settings or configurations needed — just attach the Auto Voltage Detection Charger to the battery pack and it will automatically begin to charge to the correct voltage.
- Page 9 EAGLE PERFROMANCE SERIES CHARGE CABLE ASSEMBLIES Compatible with your Eagle Performance Series Auto Voltage Detection 602RXV EZ-GO RVX POWERWISE STYLE ANDERSON GREY SB50 602611 EZ-GO 36V TXT D-PLUG POWERWISE STYLE 602619 YAMAHA MAC 2-PIN NABSON STYLE 602STAR STAR CAR 3-PIN 602618 CLUB CAR ROUND 3-PIN POWERDRIVE STYLE 602607 CLUB CAR/E-Z-GO/YAMAHA CROWSFOOT 602YAM YAMAHA DRIVE 3-PIN...
-
Page 10: Instructions Importantes Concernant La Sécurité
INSTRUCTIONS IMPORTANTES CONCERNANT LA SÉCURITÉ : SAVE THESE INSTRUCTIONS. This manual contains important safety and operating instructions for future reference. CONCERVER CES INSTRUCTIONS. CE MANUEL CONTIENT DES INSTRUCTIONS IMPORTANTES CONCERNANT LA SÉCURITÉ ET LE FONCTIONNEMENT. Understand and relate the Hazard Levels and Signal Words utilized in this manual with the following definitions: This symbol means: Hazards or unsafe practices, which could result in severe personal injury or death... - Page 11 14. Replacement Parts and Accessories. When maintaining, only use accessories intended for use with this PCS product. Approved accessories are available from Pro Charging Systems (800.742.2740). 15. CAUTION: To reduce the risk of fire, use only on circuits provided with 15 amperes branch...
- Page 12 Important Note: If the PCS charger has a model number containing the letters OB, it is not intended to be used as a stationary device. To reduce risk of battery explosion, follow these instructions, those published by the battery manufacturer, and by the manufacturer of any equipment that you intend to use in the vicinity of battery.
- Page 13 Use charger for charging a LEAD-ACID (lead acid, sealed lead acid, gel cell and AGM) battery only. It is not intended to supply power to a low voltage electrical system other than in a start- er-motor application. Do not use battery charger for charging dry-cell batteries that are commonly used with home appliances.
- Page 14 Never place the charger directly above or below the battery being charged; gases or flu- ids from the battery will corrode and damage the charger. Locate the charger as far away from the battery as DC cables permit. Ne jamais placer le chargeur directment sous la batterie à charger ou audessus de cette dernière. Les gaz ou les fluids qui sèchappent de la batterie peuvent entrainer la corrosion du chargeur ou l’endommager.