Axis P1455-LE-3 User Manual page 5

AXIS P1455–LE-3 License Plate Verifier Kit
Get started
Step-by-step guide
When you first run the application, set up Free flow or Access control using the step-by-step guide. If you want to make changes
later on, it can be found in the Settings tab under Configuration wizard.
Free flow
In Free flow, the application can detect and read license plates in slow speed traffic on larger access roads, city centers and enclosed
areas like campuses, ports or airports. This allows for LPR-forensic search and LPR triggered events in a VMS.
1. Select Free flow and click Next.
2. Select the image rotation that corresponds to how your camera is mounted.
3. Select the number of areas of interest. Note that one area can detect plates in both directions
4. Select the region where the camera is located.
5. Select capture type.
- License plate crop saves only the license plate.
- Vehicle crop saves the entire captured vehicle.
- Frame downsized 480x270 saves the entire image and reduces the resolution to 480x270.
- Full frame saves the entire image at full resolution.
6. Drag the anchor points to adjust the area of interest. See Adjust the area of interest on page 8 .
7. Adjust the direction of the area of interest. Click the arrow and rotate to set the direction. The direction determines how
the application registers vehicles entering or exiting the area.
8. Click Next
9. In the Protocol drop-down list, select one of the following protocols:
- TCP
- HTTP POST
Horizontal tilt.
5