Axis P1455-LE-3 User Manual page 3

AXIS P1455–LE-3 License Plate Verifier Kit
Get started
Get started
These setup instructions are valid for all scenarios:
1. Camera mounting recommendations on page 3
2. Step-by-step guide on page 5
3. Adjust the area of interest on page 8
4. Select region on page 9
5. Set up event storage on page 9
Camera mounting recommendations
• When you select the mounting location, remember that direct sunlight can distort the image, for example, during sunrise
and sunset.
• The mounting height for a camera in a Access control scenario should be half of the distance of that between the
vehicle and the camera.
• The mounting height for camera in a Free flow (slow traffic license plate recognition) scenario should be less than half of
the distance of that between the vehicle and the camera.
Access control capture distance: 2–7 m (6.6–23 ft). This example is based on the AXIS P3245–LVE-3 License Plate Verifier kit.
Capture distance: (x)
2.0 m (6.6 ft)
3.0 m (9.8 ft)
4.0 m (13 ft)
5.0 m (16 ft)
7.0 m (23 ft)
Free flow capture distance: 7–20m (23–65 ft). This example is based on the AXIS P1455–LE-3 License Plate Verifier kit.
Mounting height (y)
1.0 m (3.3 ft)
1.5 m (4.9 ft)
2.0 m (6.6 ft)
2.5 m (8.2 ft)
3.5 m (11 ft)
3