Mounting The Camera - D-Link DCS-7000L Quick Installation Manual

MOUNTING THE CAMERA

Please refer to the steps below to assist you with mounting the camera. We suggest that you
configure the camera before mounting.
DCS-7000L
Step 1:
Place the mounting base where you want to position the camera
and use a pencil to mark the holes.
Step 2:
Depending on the material of the wall or ceiling, use proper tools to
drill two holes or screws where you marked. If the wall is made out
of concrete, drill the holes first, insert the plastic anchors and then
the screws. The space between the camera and the screwheads
should be 3mm.
Step 3:
Place the mounting base over the screw that is mounted on the
wall. Make sure to fit the screw-heads over the big holes and slide it
downward to lock firmly. Lightly pull the base forward to make sure
that it is locked.
Step 4:
Place the base cover on the base and screw the camera stem
clockwise into the mounting base.
Step 5:
Place the camera over the camera stem and screw into place.
Adjust the angle of the camera as desired, then tighten the collar on
the camera stem to lock it in place.
5