Why Can't The Installabon Wizard On The Cd Find My Network Connected Camera; How Do I Set An Administrator (Admin) Password On My Dcs-5020L - D-Link DCS-5020L Manual

Why can't the installation wizard on the CD find my network
2.
connected camera?
This problem can be caused by a firmware upgrade on your camera. Please go to h^p://
www.dlink.com/support to download the latest version of the setup wizard which supports
your camera's current firmware version.
How do I set an administrator (admin) password on my
3.
DCS-5020L?
Note: mydlink Cloud Service registraBon requires the admin password
Step 1: Open a web browser and enter the IP address of the camera in the address bar
(default is 192.168.0.20). Press Enter.
Step 2: The default username is admin and the password field should be lef blank. Click OK.
Step 3: Click the Maintenance tab at the top and then click Admin from the menu on the lef-­‐
hand side.