Hardware Installation; Installing The Camera - D-Link DSB-C100 User Manual

2

Hardware Installation

Installation of a D-Link DSB-C100 requires installation of
the camera hardware itself, and then installation of the
software drivers.

Installing the Camera

Please verify that you have Windows 98 or Windows 2000
running and working before attempting to install your
DSB-C100.
Install the camera by plugging its USB type 'A' connector
into an available USB port on your PC or on any USB hub
attached to your PC.
No power adapter is
required, the DSB-C100
is powered directly by
the USB Bus.
Once the camera has
been plugged in the Add
New Hardware Wizard
will start automatically.
This concludes the hardware installation section of the
manual.
2