Hardware Installation; Installing The Camera - D-Link DRU-100C User Manual

2

Hardware Installation

Installation of a D-Link DRU-100C requires installation of the
camera hardware itself, and then installation of the software
drivers.

Installing the Camera

Please verify that you have Windows 98 or Windows 2000 running
and working before attempting to install your DRU-100C.
Install the camera by plugging its USB type 'A' connector into
an available USB port on your PC or on any USB hub attached
to your PC.
No power adapter is
required, the DRU-
100C is powered
directly by the USB
Bus.
Once the camera has
been plugged in the Add
New Hardware Wizard
2