Selecting System Settings - Bosch Kiox Original Operating Instructions

Selecting system settings

Fit the on-board computer in the holder and proceed as follows while the bi-
cycle is stationary:
Go to the status page (use the button < (10) on the operating unit to get to
the first display) and press the select button (9) to call up the <Settings>.
You can use the – (11) and + (12) buttons to select the setting you want.
You can open the settings, as well as any additional submenus, using the se-
lect button (9). You can use the button < (10) to go back to the previous
menu from any settings menu.
The following settings can be changed in the <Sys settings>:
– <Brightness>
The brightness can be adjusted in steps of 10 % from 0–100 %. The val-
ues can be adjusted with the </> buttons and selected with the +/– but-
tons. When the <Automatic> option is selected, the brightness automati-
cally adjusts to the ambient light.
– <Time>
The values can be adjusted with the </> buttons and selected with the
+/– buttons.
– <Date>
The current date can be set here.
– <Time zone>
The correct time zone can be selected here.
– <24h format>
This time format can be switched on or off.
– <Bright background>
The bright background can be switched on or off.
– <Imperial units>
If this option is switched on, imperial measurements are used (e.g. miles
instead of kilometers).
– <Language>
The required language for the interface can be selected here from nine
options.
– <Factory reset>
This menu item can be used to reset the on-board computer to factory
settings.
Bosch eBike Systems
English – 22
1 270 U20 Ken | (10.12.2021)