My Ebike> Menu Item; Shop> Menu Item - Bosch Kiox Original Operating Instructions

English – 49
If you are using Nyon, the planned route is automatically transmitted to
Nyon as soon as there is a connection between the app and Nyon.
If you are using Kiox, then you transmit the planned route by selecting the
button to start the route and confirm with OK once you have read the safety
instructions.
In addition to route planning, you can find your previously saved destina-
tions and routes in the search history.
Under saved routes, planned routes are also available to you through the Ko-
moot app, if you have previously connected with Komoot.
Based on your current location, you can also receive directions to take you
home or to work.
<My eBike> Menu Item
Upon initial installation of the app, a connection between the app and the
on-board computer is established via this menu item.
To achieve this, select <Add new eBike device> and follow the instruc-
tions.
Once successfully linked, the currently connected on-board computer and
its associated eBike components will be displayed.
The eBikes that were connected with Kiox or Nyon will be displayed.
If the on-board computer has already been fitted on at least two different
eBikes, these will be displayed here and can be selected. Otherwise, no se-
lection is possible. For each eBike, the name can be changed or the eBike
can be deleted from the selection list in the online portal.
<Shop> menu item
If you are using Kiox, you have the option of expanding the functionality of
your on-board computer with the <Shop> menu item in terms of premium
functions.
Lock
By setting up and activating the Lock, you can deactivate the eBike drive unit
assistance by removing the on-board computer. The drive unit can only be
activated using the on-board computer associated with the eBike (see "Lock
(premium function)", page English – 29).
Bosch eBike Systems 1 270 U20 Ken | (10.12.2021)