Bosch Kiox Original Operating Instructions page 37

– <My eBike> – Settings for your eBike
You can reset the counters (such as the number of kilometers traveled
that day or average values) to "0" either automatically or manually, and
you can reset the range. You can change the wheel circumference value
that was preset by the manufacturer by ±5 %. If your eBike features
eShift, you can also configure your eShift system here. The bike retailer
can schedule the service based on a mileage and/or a time period. The
bike component page displays the serial number and hardware and soft-
ware versions for each component, in addition to other key data that is
relevant for the components.
◦ <Reset> Indicates when the last reset took place. The trip distance and
average values can be reset.
◦ <Auto. reset> Select from <Off>, <Once a day> or <After 4 hours>
◦ <Reset range calculation> The value can be reset to the default set-
ting here.
◦ <eShift> (optional)
The cadence and starting gear can be set here.
◦ <Wheel circumference> The value of the wheel circumference can be
adjusted or reset to the default setting here.
◦ <Next Service: ...> only appears if a service date has been entered by
the manufacturer or dealer.
◦ <Components> Information about the eBike components installed
– <Screens> Here you can set the content and order of the screens, and
reset these to factory settings if required. <Screens> can be used to per-
sonalize the displays.
◦ Adjusting the screens/tiles
◦ Max. 10 screens can be adjusted
◦ Showing and hiding screens
◦ Changing layout of between 1 and 4 tiles per screen
◦ Resetting to factory settings
– <Bluetooth> – Switching the Bluetooth® function on or off:
Connected devices, such as the connected smartphone and connected
heart rate monitor, are displayed.
Go to <Settings> → <Bluetooth> to add a new heart rate monitor or re-
move one that is no longer required.
Recommended heart rate monitors:
◦ Polar H7
Bosch eBike Systems
English – 37
1 270 U20 Ken | (10.12.2021)