About Camera Setup - Panasonic BL-C30 Installation Manual

Troubleshooting

2.2 About Camera Setup

Note
If you are experiencing any problems, it is recommended that you
temporarily disable all firewall, pop-up killer, and virus detection
software. Once the problem is identified and corrected, you can restart
the Setup Program.
Problem
Automatic Setup • More than 20 minutes have passed, after turning the camera
fails using Setup
Program.
• Multiple camera IP addresses are overlapping.
Viewnetcam.com • Your PC is not connected to the Internet through the router.
registration fails
using Setup
Program.
• If you do not receive an E-mail from the Viewnetcam.com
• After you registered with the Viewnetcam.com service,
All manuals and user guides at all-guides.com
Cause and Remedy
on.
Disconnect the plug of the AC cord from the outlet, and
reconnect it again. Set up the camera again following the
Getting Started.
If you install multiple cameras, turn the camera on one by
one.
Configure the router for the Internet connection from your
PC following the router manual. And register with the
Viewnetcam.com service.
service, your registered E-mail address may be incorrect.
Register your correct E-mail address again at the
Viewnetcam.com website at
"http://www.viewnetcam.com".
"Expired" is displayed at the Personal (Camera) URL on the
Viewnetcam.com page or at the Camera URL in the DDNS on
the Status page.
Restart the camera, and confirm that your registered URL
is displayed on their pages.
Installation/Troubleshooting
21