Advertisement
Quick Links
N A D I YA
WALL-MOUNT VANITY
SKU: 950070, 950071, 950072, 950073, 950074, 950075, 950076, 950077, 950078
BEFORE YOU BEGIN
We recommend consulting a professional if you are
unfamiliar with installing bathroom hardware. Signature
Hardware accepts no liability for any damage to the
vanity, plumbing, countertop, sink, wall, or for personal
injury during installation.
Observe all local plumbing and building codes.
Unpack and inspect the product for shipping damage. If
any damage is found, contact our Customer Relations
team at 1-866-855-2284.
GETTING STARTED
Ensure that you have gathered all of the required
materials that are needed for the installation.
Because wall construction and materials vary from
home to home, Signature Hardware does not always
provide mounting hardware. The appropriate
mounting hardware can be purchased from your local
hardware store.
The vanity must be fastened to studs behind the
�nished wall. If the studs do not align with the vanity,
proper wood blocking must be installed between the
studs where the vanity will mount.
For Warranty information, please visit: signaturehardware.com/services/warranty
TOOLS AND MATERIALS:
Pencil
Tape Measure
Screwdriver
1
Level
Drill
Lag Bolts
Phillips
REVISED 04/06/2020
CODES: 531666, 531667, 531668, 531669
531670, 531671, 531672, 531673, 531674
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Signature Hardware NADIYA 457156
Summary of Contents for Signature Hardware NADIYA 457156
- Page 1 Ensure that you have gathered all of the required materials that are needed for the installation. Because wall construction and materials vary from home to home, Signature Hardware does not always provide mounting hardware. The appropriate mounting hardware can be purchased from your local hardware store.
- Page 2 N A D I YA WALL-MOUNT VANITY SKU: 950070, 950071, 950072, 950073, 950074, 950075, 950076, 950077, 950078 INSTALLATION 1. To determine height of included mounting bracket. 3. Drill pilot holes at marked mounting points. Insert Measure to desired height of vanity top, measure 5” wall anchors into the mounting holes for reinforce- below desired location of vanity and mark measure- ment.
- Page 3 N A D I YA WALL-MOUNT VANITY SKU: 950070, 950071, 950072, 950073, 950074, 950075, 950076, 950077, 950078 4. Rest vanity on mounting bracket. From the under- 5. Drill pilot holes at marked location. Once pilot side of the vanity mark through the 3 mounting holes holes are drilled, install vanity using lag bolts and on the back of the vanity.
Need help?
Do you have a question about the NADIYA 457156 and is the answer not in the manual?
Questions and answers