Signature Hardware LEDA 950612 Quick Start Manual

Lighted mirror with tunable led

Download this manual

L E D A

LIGHTED MIRROR WITH TUNABLE LED

SKU: 950612

BEFORE YOU BEGIN

We recommend consulting a professional if you are

unfamiliar with installing bathroom �xtures. Signature

Hardware accepts no liability for any damage to the wall,

medicine cabinet, or for personal injury during installa-

tion.

Observe all local plumbing and building codes.

Unpack and inspect the product for shipping damage. If

any damage is found, contact our Customer Relations

team at 1-866-855-2284.

GETTING STARTED

Ensure that you have gathered all the required

materials that are needed for the installation.

Before installing, please turn o� the main power

switch and ensure that it won't turn on.

This medicine cabinet is heavy; do not lift or install

without assistance to avoid injury.

For Warranty information, please visit: signaturehardware.com/services/warranty

TOOLS AND MATERIALS:

Tape Measure

Phillips

Screwdriver

Pencil

Drill

Level

Hammer

Drill Bit

REVISED 06/22/2020

CODES: 532113, 532114, 532115

Need help?

Do you have a question about the LEDA 950612 and is the answer not in the manual?

Page 1 L E D A LIGHTED MIRROR WITH TUNABLE LED SKU: 950612 TOOLS AND MATERIALS: BEFORE YOU BEGIN We recommend consulting a professional if you are unfamiliar with installing bathroom �xtures. Signature Hardware accepts no liability for any damage to the wall, medicine cabinet, or for personal injury during installa- Tape Measure Drill...
Page 2 L E D A LIGHTED MIRROR WITH TUNABLE LED SKU: 950612 INSTALLATION 1. After selecting the location of the medicine cabinet, 3. Attach the medicine cabinet to the mounting bar as shown, open the cabinet door, and make a mark on the check whether the wall is solid, measure the distance of the mounting holes in the support bar with a tape wall with a pencil through the backplane hole (A).
Page 3 L E D A LIGHTED MIRROR WITH TUNABLE LED SKU: 950612 BLUETOOTH INSTRUCTIONS 5. Mount the medicine cabinet on the mounting bar, 1. Move your hand under the sensor, turn on the light make sure that electricity is not on going in to the unit and the bluetooth.