Advertisement
Quick Links
LAT TOWER | 10-300 LB SELECTOR
LATTWR1-LATTWR2-LATTWR3-(3) LATTWRWHT
400467
Operator's Manual
Read the Operator's Manual entirely. When you see this
symbol, the subsequent instructions and warnings are
serious follow without exception. Your life and the lives
of others depend on it!
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Titan Fitness LATTWR1
Summary of Contents for Titan Fitness LATTWR1
- Page 1 LAT TOWER | 10-300 LB SELECTOR LATTWR1-LATTWR2-LATTWR3-(3) LATTWRWHT 400467 Operator’s Manual Read the Operator’s Manual entirely. When you see this symbol, the subsequent instructions and warnings are serious follow without exception. Your life and the lives of others depend on it!
- Page 2 PARTS DIAGRAM / EXPLODED VIEW DESCRIPTION DESCRIPTION (19) REAR BASE REAR UPRIGHT (20) WEIGHT PLATE (NO.2-30) BOTTOM CROSS BASE (21) TOP WEIGHT PLATE (NO.1) FRONT UPRIGHT (22) WEIGHT SELECTOR TOP CROSS BEAM (23) PAD SUPPORT FRAME (24) SCREW ROD BIG PLATE (25) ROD (20 CM) ADJUSTABLE TUBE...
-
Page 3: Hardware List
HARDWARE LIST... -
Page 4: Parts Diagram
PARTS DIAGRAM... - Page 5 ASSEMBLY INSTRUCTIONS STEP 1 Attach REAR UPRIGHT (2) to REAR BASE (1) using M12*100mm BOLT (36), M12 WASHER (43) and M12 NYLON LOCKNUT (45). STEP 2 Attach BOTTOM CROSS BASE (3) to REAR UPRIGHT (2) using M12*100mm BOLT (36), M12 WASHRE (43), and M12 NYLON LOCKNUT (45), and then attach the other end of the CROSS BASE (3), the PAD SUPPOERT FRAME (6) to FRONT UPRIGHT (4) using M12*100mm BOLT (36), M12 WASHER (43), and M12 NYLON LOCKNUT (45).
- Page 6 ASSEMBLY INSTRUCTIONS STEP 3 1. Attach GUIDE ROD FIXED PLATE (13) to BOTTOM CROSS BASE (3) using M10*95MM BOLT (37), M10 WASHER (44), and M10 NYLON LOCKNUT (46). 2. Insert the ROD (21 CM) (25) through the hole of the BOTTOM CROSS BASE (3) using M10*50MM BOLT (40).
- Page 7 ASSEMBLY INSTRUCTIONS STEP 5 1. Attach the TOP CROSS BEAM (5) to the REAR UPRIGHT (2) and FRONT UPRIGHT (4) using M12 X 100MM BOLT (37), M12 WASHER (45) and M12 NYLON LOCKNUT (47). 2. Insert the other end of the GUIDE ROD (35) through the hole of GUIDE ROD FIXED PLATE (13) and attach them to TOP CROSS BEAM (5) USING M10 X 100MM BOLT (38), M10 WASHER (46) AND M10 NYLON LOCKNUT (48).
- Page 8 ASSEMBLY INSTRUCTIONS STEP 7 1. Attach the BIG PLATE (7), NYLON SLEEVE (48mm) (29) to PAD SUPPORT FRAME (6) using M10x75 (40), M10 WASHER (46) and M10 NULON LOCKNUT (48). 2. Attach the REINFORCED PLATE (12) to the BOTTOM CROSS BASE (3), FRONT UPRIGHT (4) using M12x105MM BOLT (36), M12 WASHER (45) and M12 NYLON LOCKNUT (47).
- Page 9 ASSEMBLY INSTRUCTIONS STEP 9 THEN TIGHTEN ALL BOLTS AND LOCK NUTS...
- Page 10 ACKNOWLEDGEMENT OF RISK AND RELEASE OF LIABILITY The use of any equipment, including this one, involves the potential risk of injury. Apart from any warranty claim that might be presented for a claimed defect in material or workmanship of the product, you accept and assume full responsibility for any and all injuries, damages (both economic and non-economic), and losses of any type, which may occur, and you fully and forever release and discharge Titan, its insurers, employees, officers, directors, associates, and agents from any and all claims, demands, damages,...
- Page 11 NEED HELP? CONTACT US FIRST. 1-888-410-1503 info@titan.fitness www.titan.fitness © 2021 Titan Brands...
Need help?
Do you have a question about the LATTWR1 and is the answer not in the manual?
Questions and answers