Introduction
1.2 Intended use
1.3 Target group
1.4 Additional documents
6
We reserve the right to make technical modifications
WMS products make it possible to connect different devices like sun shading
products and lighting equipment as well as window drives and sensors.
CAUTION
The WMS WebControl pro is for indoor use only. It is not water-proof.
The operating range of radio remote controls is limited both by legal regula-
tions for radio systems and structural factors. Sufficient radio reception must
be ensured when planning the project. This is especially the case where the
radio signal has to pass through walls and ceilings. The control should not
be installed in the immediate vicinity of metal components (steel beams, rein-
forced concrete, fire doors).
Therefore, check that the unit is functioning properly before installing/setting
it up permanently. Both the WMS WebControl pro and the WMS components
being controlled must have excellent radio reception.
These instructions are intended for persons who wish to operate their sun
shading products using an app or browser.
These instructions provide the information necessary to configure
the WMS WebControl pro. The following document is available in addition to
these instructions:
Document
WMS WebControl pro - Quick Start Guide
WMS WebControl pro
warema_2035145_alhb_en_v2•2021-04-01
Art. no.
2022744
Need help?
Do you have a question about the WMS WebControl pro and is the answer not in the manual?
Questions and answers