How To Operate Your Ceiling Fan - Fanimation studio AIRE DUO LP8066 Series Manual

How to Assemble Your Light Kit and Ceiling Fan Blades (continued)
5. Remove one of the three screws in the lower
housing assembly. Retain the screw for later and
slightly loosen the remaining two screws. (Figure 5)
7. Secure the glass to
clockwise direction. Do not over-tighten. (Figure 7)
IMPORTANT:
1.
(not included) to control fan speed will damage the fan.
To reduce the risk of fire or electrical shock, do not use
a full range dimmer switch to control the fan speed.
(Figure 1)
light kit by twisting in a

How to Operate Your Ceiling Fan

Using a full range dimmer switch
Lower Housing
Assembly
Lower Housing
Assembly
Light Kit
Light Kit
For illustrative purposes only-not
intended to cover all types of controls
13
Figure 5
Figure 6
Glass
Figure 7
Figure 1