How To Operate Your Ceiling Fan - Fanimation PROP LP8333 Series Manual

How to Assemble Your Light Kit (Continued)
2. Secure the light kit assembly to the motor assembly
by twisting in a clockwise direction. (Figure 2)
CAUTION
The light source is designed for this specific
application and can overheat if serviced by untrained
personnel. If any servicing is required, the product
should be returned to an authorized service facility
for examination or repair.
1. IMPORTANT: Using a full range dimmer switch (not
included) to control fan speed will damage the fan. To
reduce the risk of fire or electrical shock, do not use a
full range dimmer switch to control the fan speed.
(Figure 1)
2. Restore electrical power to the outlet box by turning
the electricity on at the main fuse box. (Figure 2)
WARNING
Check to see that all connections are tight, including
ground, and that no bare wire is visible at the wire
connectors, except for the ground wire. Do not
operate fan until the blades are in place. Noise and
fan damage could result.
WARNING
Do not operate this fan with a variable (Rheostat) wall
controller or dimmer switch. Doing so could result in
damage to the ceiling fan's remote control unit.
3. Remove the battery cover from remote control by
screwdriver and retain the screw for later. (Figure 3)

How to Operate Your Ceiling Fan

Motor Assembly
Light Kit Assembly
For illustrative purposes only-not
intended to cover all types of controls
14
Figure 2
Figure 1
Main Fuse Box
Figure 2
Figure 3